Overview

The Blamcon Vyper is a modern submachine lightgun. Under its futuristic styling lies the exact handling of the venerable HK MP5. Featuring the same short-pull 2-stage trigger, the Vyper also sports a Picatinny rail that takes real optics. To enhance gameplay, there’s a D-pad with two option buttons on the side, a working selector, and the ability to pull the mag to reload.

Features:

Trigger and A/B buttons
Pump is Assignable Button
Configurable Recoil Via Swappable Stocks
Rumble
RGB LED
D-pad with Select/Start/Selector buttons
GX-16 swappable connection

Build Video

3D Model Overview

3D Wiring Overview

Use the model browser to highlight any parts and see where they fit in the Vyper.

Use the explode model to see how it fits together.

Build Guide

NOTE: The N20 Rumble has been SWAPPED for a 7mm25mm encapsulated rumble motor as the rumble ‘sticking’ for some people because it would get hit against the top or side if it was too tight or they didn’t clear the area enough, this was causing a lot of frustration. The 7mm also works better and is quieter, just a win/win/win. Kits are updated but if you are sourcing yourself keep this in mind, I will update the manual as soon as I can.

(Double-click on manual for full screen view)

3D Print Files

The M3F files are in the correct print orientation and organized by tray. They will open in Orca Slicer as trays you can slice with your own settings and printer.

The Gcode files are ready to print for the printers listed, they are set up for PLA at .16. They print slow and strong and these are the same print settings we use. We print with Matter3D Performance PLA but should work with any decent PLA, print at your own risk.

All Blamcon models are released under the Creative Commons – Attribution – Non-Commercial – No Derivatives license. By downloading models from Props3D you are agreeing to abide by these terms.