Overview

The standard sidearm for all judges you’ll be throwing perps into iso-cubes faster than you can say “Hotshot”, what’s left of them anyway. Featuring slide recoil, reload on mag change, and just an extra helping of bad-ass this pistol is just as good turning heads as it is removing them.

Features:

  • Trigger
  • Pull for A Button
  • Rumble
  • Hot Swappable between Electronics Props3D Version (3 parts)
  • Ambidextrous and accessible design
  • GX-16 swappable connection

3D Model Overview

Use the model browser to highlight any parts and see where they fit in the Lawgiver.

Use the explode model to see how it fits together.

Build Guide

Source parts yourself or buy a complete kit (or even a ready to go Phazer), build your way! If you do build yourself the parts list below are from vendors we have used. Some links are affiliate and help support Blamcon.

Buy Complete Phaser Parts Kit

Blamcon Store (Coming Soon)

Individual Parts List

Parts list for the Lawgiver, links are clickable and go to the last known quality vendor of that part. If a link is broken please let me know on Discord.

  • Blamcon Core
    Buy
  • SEN0158 Camera OR Blamccam
    Buy
  • Wide Angle Lens (SEN0158 ONLY)
    Buy
  • JF-0826B Solenoid
    Buy
  • GX16 Connector
    Buy
  • Neopixel LED
    Buy
  • Neopixel Diffuser
    Buy
    (Printable one included in download files)
  • 7mm Rumble Motor
    Buy
  • 8mm button X 3
    Buy
  • Mini Microswitch
    Buy
  • LED Green 3mm
    Buy
  • LED Red 3mm
    Buy
  • 4x15x.3 Spring X 2
    Buy
  • 4x8x.5 Washer X 2
    Buy
  • Threaded Rod M3X62
    Buy
  • Round Standoff M3X10
    Buy
  • Metal Rod 2x12mm X 2
    Buy
  • Metal Rod 4x14mm
    Buy
  • Metal Rod M4x50 X 2
    Buy
  • Button Head Metric Screw M4X10 X 2
    Buy
  • Cap Head Metric Screw
    Buy
    M3X16 X 2

    M3X18

  • Flat Head Metric Screw
    Buy
    M3X6 X 2

    M3X12 X 2

  • Pan Head Self-Tapping Screw
    Buy
    M2X5 X 4

    M3X10 X 4

    M4X8 X 2

    M4X25 X 2

  • Square Nut M3
    Buy

Wire Lengths COMING SOON

Colors are just recommended.

28ga Length(mm) Use
Black 50 RGB
80 A/B G bridge
Red 50 RGB
Yellow 70 Trigger
60 Trigger
Gray 75 A
Blue 65 B
White 50 RGB

1. COMING SOON

Click here to add your own text

Build Guide

Source parts yourself or buy a complete kit (or even a ready to go Phazer), build your way! If you do build yourself the parts list below are from vendors we have used. Some links are affiliate and help support Blamcon.

The M3F files are in the correct print orientation and organized by tray. They will open in Orca Slicer as trays you can slice with your own settings and printer.

The Gcode files are ready to print for the printers listed, they are set up for PLA at .16. They print slow and strong and these are the same print settings we use. We print with Matter3D Performance PLA but should work with any decent PLA, print at your own risk.

All Blamcon models are released under the Creative Commons – Attribution – Non-Commercial – No Derivatives license. By downloading models from Props3D you are agreeing to abide by these terms.

Blamcon Lawgiver STL Files on Thingiverse

VISIT (coming soon)
Back Back See All Blamcons Basket Basket Blamcon Store