Tools and Parts Links
Here is a list of all the tools and parts used across Blamcon projects. Some links here may be affiliate, and are disclosed as such, but they are the same links we buy from
Physical Parts
The nuts and bolts that hold it all together
Pan Head Screws
The best screws for connecting 3D prints.
Flat Head Screws
Flush connector screws for joining parts tightly.
Wide Angle Lens
Used to roughly halve the distance needed from your screen for light guns.
Self-Lubricating Bushing
4 X 6 X 6/10*1
Large Springs
0.4mm, 25mm, 6mm
0.5mm, 40mm, 8mm
Button Head Screws
Machine screws for electronic parts and connecting things together.
Square Nuts
M3 Square nuts for holding parts together
Brass Washers
M4 X 8mm X .5mm washers
Carbon Fiber Tube
10 X 8 X 500MM Carbon Fiber Tube
Cap Head Screws
Recessed screws for connecting parts together flush.
Grub Screws
Used for pinning parts in place.
LED Diffuser
Used for diffusing LEDs and creating a soft effect
Metal Rods
Used for holding switches and actuating parts.
Electronic Parts
If it’s got a wire, or is wire, it’s here
Mini Microswitch
Used for trigger switches
8mm Metal Button
Momentary buttons used as A and B buttons
USB Power Cables
Used for Blamcon Bars and Blamcon Modules, power only
GX-16-6
Used for connecting control cables to Blamcons.
Microswitch
Used for trigger switches
USB Connectors
4 pin USB connectors used to connect the Pico to the GX16
Five Direction Joystick Module
Used for adding a D-pad to your Blamcon
7mm Rumble Motor
Used for adding a D-pad to your Blamcon
SEN0158 IR Camera
IR Positional Camera for Tracking the Light Gun in 3D Space
NeoPixel LED
Used for RGB Lighting
USB Cable
Used for USB only Blamcon builds
Wii LED Bar
These are no where near as good as the Blamcon ones, but they’re cheap and work. Don’t blame us if the performance isn’t there.