Blamcon Core
The Blamcon core is the heart of all Blamcon light guns and Blamcon conversions. This compact universal Light Gun board comes preinstalled with Blamcon and has all the on-board hardware and connections you need to get going quickly and easily into the world of DIY light guns.
Features
- On-board Raspberry Pi Pico W
- On-board electronics for rumble and recoil
- Connections for joystick, buttons, foot pedal, and everything else you need to play light gun games
Blamcon GX16 Cable + Adapter
The Blamcon GX16 cable has everything you need to get going with your new Blamcon or any GX16 6 pin light gun. The breakout box has a standard USB connection on one end with a 5.5mmx2.1mm barrel jack and a GX16-6 female connector on the other end. Comes with a 12V 3A adapter.
Pinout:
- 12V Positive
- 12V Negative
- USB Positive
- USB Data +
- USB Data –
- USB Negative
$30~$40
Blamcon IR Bar Set, Ready To Go | Up to 85” TV
Complete and ready to go Blamcon Light Bar set to mount to the top and bottom of your TV or monitor.
If you are using a Blamcon, the bars are by far the best way to go. They will give you the best play area and are the easiest to mount properly. bars are easy to center and are the cleanest way to set up your IR emitters.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 2 Blamcon Bars connected to one 1M USB Power Cable
- 130 CM cable connecting the bars, more than enough for an 85″ or under TV
- Alien Tape mounts, one flat and one adjustable, to connect to your TV.
$55
Blamcon IR 4 Module Set, Ready To Go | Up to 85” TV
Complete and ready to go Blamcon Light Emitter set to mount to your TV in edge or 4 corner configuration.
4 Corner: 2 banks of LEDs on top and bottom edge of TV
4 corners Pattern is for third party compatibility. Single sensors also allow you to move them around if you want multiple 3rd party support. using this config gives you less lateral play area so we recommend moving these to blamcon bar spacing, 250mm, if you do. The build guide for this starts AFTER the bars section.
Crosshair: One LED bank on each edge of your TV
Crosshair pattern is for compatibility with third party systems and is the hardest to mount. We do not recommend using this config only for Blamcon. Make sure you change your IR settings to crosshair in the free Blamcon ARC utility on steam.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 2 Blamcon Bars connected to one 1M USB Power Cable
- 130 CM cable connecting the bars, more than enough for an 85″ or under TV
- Alien Tape mounts, one flat and one adjustable, to connect to your TV.
$60
Blamcon IR Mega Bar Set, Ready To Go | Up to 150” TV
Complete and ready to go Blamcon Light Mega Bar set to mount to the top and bottom of your TV or monitor.
If you are using a Blamcon, the bars are by far the best way to go. They will give you the best play area and are the easiest to mount properly. bars are easy to center and are the cleanest way to set up your IR emitters.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 2 Blamcon Mega Bars connected to one 1M USB Power Cable
- 5M cable connecting the bars, more than enough for an 85″ or under TV
- Alien Tape mounts, one flat and one adjustable, to connect to your TV.
$65
Blamcon IR Bar Kit | Up to 85” TV / Arcade Machine
Blamcon Light Bar kit to mount to your TV or Arcade Machine. Note you will have to 3D print the light bar files yourself, download them at: https://blamcon.com/blamcon-irbar/
No 3D printing required for arcade machines.
If you are using a Blamcon, the bars are by far the best way to go. They will give you the best play area and are the easiest to mount properly. bars are easy to center and are the cleanest way to set up your IR emitters.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 4 Blamcon Emitters with 3 Osram SFH4547 IR LEDs in Each
- 3M 28ga Wire
- 1M LED Power Cable
- Pan Head Screws – M3x10mm X 12
- Pan Head Screws – M3x12mm X 4
- Cap Head Screws – M3x16mm X 4
$40
Blamcon IR 4 Module Kit | Up to 85” TV / Arcade Machine
Blamcon IR Module kit to mount to your TV in edge or 4 corner configuration. This kit will also work in an arcade machine
4 Corner: 2 banks of LEDs on top and bottom edge of TV
4 corners Pattern is for third party compatibility. Single sensors also allow you to move them around if you want multiple 3rd party support. using this config gives you less lateral play area so we recommend moving these to blamcon bar spacing, 250mm, if you do. The build guide for this starts AFTER the bars section.
Crosshair: One LED bank on each edge of your TV
Crosshair pattern is for compatibility with third party systems and is the hardest to mount. We do not recommend using this config only for Blamcon. Make sure you change your IR settings to crosshair in the free Blamcon ARC utility on steam.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 4 Blamcon Emitters with 3 Osram SFH4547 IR LEDs in Each
- 6.5M 28ga Wire
- 1M LED Power Cable
- Pan Head Screws – M3x10mm X 8
- Pan Head Screws – M3x12mm X 8
- Cap Head Screws – M3x16mm X 8
$45
Blamcon IR Mega Bar Kit | Up to 150” TV / Arcade Machine
Blamcon Mega Light Bar kit to mount to your TV or Arcade Machine. Note you will have to 3D print the light bar files yourself, download them at: https://blamcon.com/blamcon-irbar/
No 3D printing required for arcade machines.
If you are using a Blamcon, the bars are by far the best way to go. They will give you the best play area and are the easiest to mount properly. bars are easy to center and are the cleanest way to set up your IR emitters.
To learn more visit https://blamcon.com/blamcon-irbar/
Includes:
-
- 4 Blamcon Emitters with 3 Osram SFH4547 IR LEDs in Each
- 8M 28ga Wire
- 1M LED Power Cable
- Pan Head M3x10mm X 12
- Pan Head M3x12mm X 8
- Pan Head M3x16mm X4
- Cap Head M3x20mm X 4